Industrial Rubber Products
JMP is a major converted and wholesaler of all types of rubber sheeting and rubber gaskets. Rubber Sheeting is manufactured from natural and synthetic polymers. Rubber sheeting mostly has a cloth finish on both sides, with a smooth finish in certain polymers. Rubber sheeting comes in a variety of thickness ranging from 1.5mm to 25mm. Rubber sheeting has many uses ranging from flooring, sheeting, gasketing, insulation, protective covering etc.
INSERTION RUBBER
Insertion Rubber is a general purpose natural rubber with fabric reinforcing. It is not recommended for use with oils or hydrocarbons. Insertion is used extensively as a gasket material for low pressure water applications.
TECHNICAL DATA:
- Recommended Temp 70°C
- Hardness (A) 65 ± 5
GP 45
GP 45 has good abrasion and rebound properties. It is not recommended for use in areas with hydrocarbons and oils. It does not have a high operating temperature but has good mechanical properties and is a very resilient material.
TECHNICAL DATA:
- Recommended Temp 70°C
- Hardness (A) 45 ± 5
GP 65
GP 65 is a general purpose natural rubber. It is not recommended for use with oils or hydrocarbons. GP 65 is used for scraper blades, skirting rubber, curtains, etc. It is used extensively as a gasket material for low pressure water applications.
TECHNICAL DATA:
- Recommended Temp 70°C
- Hardness (A) 65 ± 5
RED NEOPRENE
Red Neoprene is general purpose neoprene sheeting. A good temperature, oil and a wide range of chemical resistance for use as flange gasket, scraper blades and skirt rubber, strip, curtains, mats, sleeves and linings.
TECHNICAL DATA:
- Recommended Temp 100°C
- Hardness (A) 70 ± 5
BLACK NEOPRENE
Black Neoprene is a general purpose neoprene sheeting. A good temperature, oil and a wide range of chemical resistance for use as flange gasket, scraper blades and skirt rubber, strip, curtains, mats, sleeves and linings.
TECHNICAL DATA:
- Recommended Temp 120°C
- Hardness (A) 70 ± 5
EPDM
EPDM has an excellent operating temperature and is highly recommended for outdoor uses, as it is extremely resistant to oxidation, UV and ozone. EDPM does not have good oil resistance.
TECHNICAL DATA:
- Recommended Temp 120°C
- Hardness (A) 65 ± 5
NITRILE SMOOTH
Nitrile has a good general resistance to oil along with good mechanical properties. It has a satisfactory resistance to general hydrocarbons. Due to its polar nature, it is not recommended for use with polar liquids, i.e. ketones, ethers and amines.
TECHNICAL DATA:
- Recommended Temp 90°C
- Hardness (A) 70 ± 5
NITRILE HI-SPEC
Hi-Spec Nitrile has a good resistance to oil and fuels along with good mechanical properties. It has a good resistance to general hydrocarbons. Due to its polar nature, it is not recommended for use with polar liquids, i.e. ketones, ethers and amines.
TECHNICAL DATA:
- Recommended Temp 100°C
- Hardness (A) 65 ± 5
JMP PROLINER
Proliner is a specialist material that has excellent abrasion resistant properties. It is used as anti-abrasion rubber linings in cyclones, tanks, etc.
TECHNICAL DATA:
- Recommended Temp 70°C
- Hardness (A) 38 ± 5
FOOD RUBBER
Food rubber is a white food quality natural rubber. Made to FDA specification and non-toxic. Mainly for use in the food processing industry or where a white rubber is required.
TECHNICAL DATA:
- Recommended Temp 80°C
- Hardness (A) 55 ± 5
VITON
Fluoro Elastomer rubber or Viton has a high resistance to heat and also possesses good flame resistant properties. Viton has excellent resistance to oxygen, ozone and natural weathering. It has good resistance to hydrocarbons, aliphatic, aromatic and chlorinated chemicals as well as to acids and alkalis. It has poor performance against ether and ketone bases.
TECHNICAL DATA:
- Recommended Temp 250°C
- Hardness (A) 75 ± 5
SILICONE
Silicone is physiologically inert, thus making it the preferred choice for the medical, pharmaceutical and food processing industries. Silicone retains its properties at both high and low temperatures. It has reasonable to a wide range of chemicals, but acids, alkalis, esters and kerosene should be avoided.
TECHNICAL DATA:
- Recommended Temp 180°C
- Hardness (A) 60 ± 5
